Inserter

The Inserter feature helps to automate the insertion of printed documents and additional inserts (such as marketing materials) into envelopes.

The Inserter feature:

  • Prepares print jobs for insertion.
  • Writes and sends control files to inserter controllers.
  • Receives results files from inserter controllers and interprets them to determine the insert status of each document in the job.
  • Automatically (or manually, with operator control) reconciles the job, and reprints any damaged documents.

Supported inserters

The Inserter feature works with inserters from a wide range of manufacturers. It provides sample system objects and sample configuration files for inserters from these manufacturers:

  • Bowe
  • Bowe with JetVision camera systems
  • Bowe Bell & Howell
  • Gunther
  • Inserters with Ironsides camera systems
  • Kern
  • Pitney Bowes

Prerequisites

To use the Inserter feature, first install a feature that supports document processing:

  • For PDF files, install the PDF Document Support feature.
  • For AFP files, install the AFP Support feature.

File requirements

Input files must be either:

  • PDF files for which you have defined page groups using Ricoh ProcessDirector Plug-in for Adobe Acrobat.
  • Advanced Function Presentation (AFP) format, or a format that Ricoh ProcessDirector can convert to AFP format. AFP page groups must define the mailpieces in the file.

    With the AFP Support feature installed, Ricoh ProcessDirector automatically converts line data and mixed-mode files to AFP format.

    If you have AFP Support and purchase the InfoPrint® XT product, Ricoh ProcessDirector converts Xerox metacode and Line Conditioned Data Stream (LCDS) files to AFP format.

    If you have AFP Support and purchase the Advanced Transform feature, Ricoh ProcessDirector converts PostScript, PDF, or PCL data into an AFP format that is acceptable for use with AFP document processing functions.

    The AFP Indexer mode of Ricoh Visual Workbench creates page groups in AFP files created by InfoPrint XT or the Advanced Transform feature.

    The Ricoh PostScript/PDF to AFP, PCL to AFP, and SAP to AFP Transform features convert input files into AFP image data files. These files do not contain page groups. As a result, they cannot be used with the document processing functions provided in the AFP Support feature.

Workflow

The Inserter feature adds the Insert phase to the Ricoh ProcessDirector workflow. The figure Insert phase in the Ricoh ProcessDirector workflow, shows how the Insert phase fits into the workflow.

If you have customized phase names in your system, the phase names below might not match the names that you use.

Insert phase in the Ricoh ProcessDirector workflow

Image shows the Receive, Prepare, Assemble, Print, Insert, and Complete phases

A job that requires insertion is processed through the workflow phases, with some variations specific to inserting.

Receive phase

Ricoh ProcessDirector accepts an input file for processing and creates a job in the system. It assigns the job a unique job number in the system.

Prepare phase

Ricoh ProcessDirector creates page groups and extracts the values of document properties in AFP or PDF jobs.

Assemble phase

Ricoh ProcessDirector processes the documents in the job:
  1. Ricoh ProcessDirector assigns each document in the job a unique document number.
  2. Ricoh ProcessDirector enhances the documents. For example, it hides existing insertion control marks and adds barcodes to control insertion. The barcodes contain the values of document and job properties (such as the job number, document number, and the insert sequence number of the document).

Print phase

Ricoh ProcessDirector prints the job. The job header page is configured to include the job number, the inserter job name (the inserter job name can be different from the job number), and the name of the inserter controller for the job.

Insert phase

Ricoh ProcessDirector communicates with the inserter controller and reconciles the job after it completes insertion:
  1. If the inserter controller uses an inserter control file to control the insertion of documents in a job, Ricoh ProcessDirector creates the inserter control file for the job and sends it to the inserter controller.

    You can configure Ricoh ProcessDirector to create the inserter control file before printing the job. This setting is useful if the inserter operator loads the initial portion of a large job on the inserter before the job finishes printing.
  2. The inserter operator manually loads and runs the job on the inserter.
  3. Ricoh ProcessDirector receives the inserter results file (if any) for the job and interprets it to determine which documents need to be reprinted.
  4. Ricoh ProcessDirector reconciles the job:
    • If the automatic reconciliation method is selected, Ricoh ProcessDirector automatically reprints any damaged documents.
    • If the manual reconciliation method is selected, the operator uses the Reconcile Job function to review the list of damaged documents and indicate which documents to reprint. The operator can also mark individual documents as pulled (removed) from the job. (Pulled jobs are not reprinted.)
  5. Ricoh ProcessDirector reprints documents on the printer that the administrator selected for reprints or on the printer that the operator selected during manual reconciliation.
    • If the closed-loop reprint method is selected, Ricoh ProcessDirector reprints the documents in the same job.
    • If the open-loop reprint method is selected, Ricoh ProcessDirector creates a child job to reprocess the documents (for example, add new barcodes) and print them.

Complete phase

If jobs are retained on the system, the operator can reprint any documents that are damaged after the job completes reconciliation. Two methods to reprint the documents are available:
  • Reconcile the job again to reprint the documents in the same job (closed-loop reprint method) or in a child job (open-loop reprint method).
  • Create a new job to reprint the documents. If a Transform feature is installed, Ricoh ProcessDirector can transform the documents to a different data stream and print them on a suitable printer.

Step templates

The Inserter feature adds several step templates:

  • The WriteInserterControlFile and SendInserterControlFile step templates let you create an inserter control file that tells the inserter controller how to process each document in a job and send the file to the inserter controller.
  • The SetInsertProperties step template lets you set document properties that are required for insertion.
  • The InsertJobs and Reconcile step templates let you track the insertion of documents into envelopes and decide how to handle exceptions that occur. For example, you can reprint or pull the documents.
  • The CreateInserterReprints step template lets you process documents to be reprinted after insertion by creating a print file containing only the reprints.
 
Copyright © 2006, 2015