Configuring Remote Access for SNMP

The printer can be accessed remotely by SNMP. To view remote access settings, select Printer Definition -> Network -> Remote Access and select SNMP from the list.

To change remote access settings for SNMP:

  1. Select SNMP Agent Enabled.
  2. Enter Yes to enable SNMP or No to disable it.
  3. When you have made all the changes, select OK.
  4. Follow any instructions given after selecting OK.

The following industry standard SNMP MIBs are supported by the printer:

The ANSI files for these MIBs may be downloaded from many internet sites. They are also available on the InfoPrint 4100 User Information CD.