Advancing forms using NPRO

NPRO is usable only under certain conditions, which balance safety considerations with operator convenience.

The following conditions must be met before NPRO can function:

Do this procedure to advance forms using the NPRO button.


  1. Press Stop.
  2. Press NPRO on the Align Forms panel.
  3. Select Forms -> Advance Paper (NPRO) to display the Advance Paper (NPRO) panel. Starting with the page at the transfer station, the forms move through the printer to the forms exit area. The distance they move is the fixed NPRO length plus an additional length if either the NPRO Length value Printer Definition -> Printer -> Setup) or the Pre/postprocessor Extended NPRO (Printer Definition -> Pre/Postprocessing) value is set to a non-zero value.