Disabling Form Bar Code checking

If for some reason, the correct form is loaded but the preprinted bar code is damaged, printed incorrectly, or is not readable, or if the bar code sensor is not working, you can bypass the printer-generated errors by disabling form bar code checking.

Do this procedure to disable form bar code checking.


  1. Ensure that the printer is in Not Ready status.
  2. Ensure that you have the correct Snapshot loaded.
  3. Select the Form Settings panel (Forms -> Form Settings).
  4. Change the current value in the Form Bar Code field to 0000.
  5. Select OK to accept the new value.

A restart occurs automatically. Do not attempt any other task until the restart completes.