Cleaning the stacker area


Do this procedure to clean the stacker area.

danger statement <b><1-15> To vacuum toner, use only a vacuum cleaner that IBM has approved for use with toner.

  1. Open the stacker gate.
    open the stacker gate
  2. Use a toner-certified vacuum cleaner to clean paper dust, chads, and other debris from the following:
    If you cannot open the stacker gate completely because of an installed postprocessing device, open the gate as wide as you can. Clean as much of the area as you can reach.
  3. Use a soft cloth to clean the six stacker jam sensors and two mirrors.
    cleaning jam sensors and mirrors
  4. Close the stacker gate.