Previous Page | Next Page Contents Glossary Index Working with forms > Loading forms--auto load (dual simplex mode) >

At the printer

  1. If you have tractored forms, check the tractor holes on the forms between the transfer station and the fuser entry area. If the holes show signs of tearing, adjust the Tractor Control Knob as needed.
  2. Check the forms in the stacker. Ensure that the forms are refolding in the original fold direction.
  3. Ensure that the forms-path vacuum is on (the Vacuum-Off warning indicator is off).
  4. Continue to At the touchscreen or the printer control panel.