Previous Page | Next Page Contents Glossary Index Maintaining the printer >

Adding a toner cartridge (Infoprint 4100)

Operator Tips
When 079C Toner Supply Low appears, printing operations continue and you may add toner. This message appears until the toner has been depleted, then the message changes to 0786 Add Toner, and printing stops. When the Add Toner message appears, you must add toner before printing can resume.

You need the following items when you add toner:

  1. Open the right front cover of the printer.
  2. Open a new toner carton. Remove the carton lid, the new toner cartridge, and the cardboard tray. Save the carton lid for later use in step 12.
  3. Set the new toner cartridge aside.
  4. Tap the cartridge to loosen any toner still in the cartridge.
  5. Line up the cardboard tray against the front edge of the toner hopper.
  6. Open the latch (1) in front of the toner cartridge.
  7. Pull the old cartridge out onto the cardboard tray carefully to prevent toner from spilling.
  8. Place the old cartridge and cardboard tray into the carton. Set aside for disposal.
  9. Insert the new toner cartridge, with the tab of the seal facing you, into the hopper.
    Make sure the toner is evenly distributed within the new cartridge.
  10. Fold the tab down.
  11. Close the toner cartridge latch (1).
  12. Place the carton lid on the lower lip of the toner hopper with the edge of the carton lid under the upper lips of the toner hopper.
  13. Remove the cartridge seal from the toner cartridge by firmly pulling on the tab and rolling it under the seal until the seal is completely removed. Place the rolled seal in the carton lid.
  14. Remove the carton lid from the toner hopper. Discard the carton lid, the cartridge seal, and the carton with the used toner cartridge.
  15. Clean any spilled toner.
  16. Go to the Main panel of the touchscreen and select the appropriate toner gauge.
  17. On the panel that appears, specify the amount of toner you added.
    The gauges on the printer show how much more you can print by using the information you specify. It is important to tell the printer how much toner you add.
  18. If the message Change toner collector appears, go to Changing the toner collector. (This message does not appear every time you change the toner cartridge.)