Previous Page | Next Page Contents Glossary Index Operating the Printer > Switching Printer Modes (Dual Simplex/Duplex) >

Switching from Duplex to Dual Simplex Mode

  1. To stop the printer, SELECT the Stop push-button on the Display/Touch Screen.
  2. SELECT the Configure pull-down menu on the main Display/Touch Screen window.
  3. SELECT the Configure Printer procedure. The Configure Printer window appears.
  4. Find and SELECT the Printer Mode item.
  5. SELECT the Simplex item.
  6. SELECT the OK push-button.
  7. SELECT Restart when this prompt appears.
  8. A window appears that informs you that an automatic Shutdown procedure has started. This is followed by a window that states that the system is being "rebooted" (reloading AFCCU microcode). At the completion of the microcode reload, the Printer Mode change is in effect (one of the main simplex printer Display/Touch Screen windows appears).
    No system power-off and power-on procedure is required.
  9. To remove any forms still in the printer, see Clearing the Forms Path.
  10. Load paper and assign forms in both printers for dual simplex operation (see Loading Forms (Simplex or Dual Simplex Mode)).
  11. SELECT the Ready push-button.

For additional information, see Configuring the System.