Previous Page | Next Page Contents Glossary Index Taking Care of Problems > Forms Jams >

Jam Between Printer 1 and Printer 2

A jam occurring between Printer 1 and Printer 2 normally causes the forms to tear and separate. Both Printer 1 and Printer 2 continue to feed forms and print until an error condition is detected and displayed. A large supply of forms may be present on the floor at the output of Printer 1.

  1. SELECT the Check Reset push-button on the Intervention Required Display/Touch Screen window.
  2. Do not flush any forms out of either printer.
  3. Manually pull the forms through the Buffer/Flipper Unit under Printer 2 and up into forms input area of Printer 2.
  4. Begin the Thread/Align Forms Display/Touch Screen procedure (see Forms Are Broken Between the Printers). If necessary, use the Printer 1 Feed Page push-button on the Thread/Align Forms window to feed enough forms to splice, at the Splicing Station of Printer 2, the forms from the Buffer/Flipper Unit to the forms remaining in the Printer 2 path.
  5. Complete the Thread/Align Forms procedure.
  6. SELECT the Ready push-button on the main Display/Touch Screen window.